BSP Plastic & Mould Co., LTD

Technology

We have over 50 professional designers to make 2D & 3D plans according to the customers’ requirements by adopting the most advanced technical design software. We will ensure that the design meets the customers demand and schedule.
　

Analysis & verification on product design

1. Experience & rule-based analysis

It is a routine and “must-done” job to check customer product design before mould design whether requested or not. It will help us pick-up potential trouble-making points to avoid time-consuming costly modification after trial run.
Generally, a product designer is not necessary to be a mould designer at the same time. As a result, generally, it is unavoidable that many customers’ drawings include un-mouldable and/or trouble-making features, such as undercut and hidden features or too thick wall, etc. As moulder, we are obliged to pick out and fix all these problems.
As you can imagine, some time will be cost here. But, it will save us time and money in the long run.
　

2. mouldflow Analysis

We address this process for some projects, especially for some big-sized parts, because, sometimes, we need to assess the manufacturing feasibility and/or optimize mould layout beforehand. This way, we can find out problems in the early stage when the cost of change is least, instead of waiting until first trial run to find defectives such as sink marks, air traps, weld lines, etc. Through simulating, analyzing, optimizing and validating plastics part and mould designs, we avoid the high cost and time delays associated to the problems undiscovered in the design stage. This is important especially for big-size, high-cost moulds.

Software

                  Unigraphics/Pro-E for tooling layout/ product design
                  MPI/MPA/C-mould for mouldflow analysis
                  AutoCAD for 2d drawing
                  UG/MasterCAM for CNC programming
                  SolidWorks for 3D construction
　